Tourque setting for wheel bearing?

[wyo6.5]

I'm changing out my left front wheel bearing. What is the amount of tourque I sh ould tighten it down to. Also, are the bearings sealed or will I have to pack them?

[sixnickel]

I don't know the what the "book torque" is but when I do them I just run them up "super tight" 250-300 "#s. They are a sealed bearing just put them in. Being a K2500HD you have 8 lugs and what they call trapped rotors. You will have to drive out the wheel studs to change the rotor Then drive or press them back in the new hub. Make shure you check the lug nut torque after about a 100 miles of driving in case the studs were not seated all the way in.Good Luck and Have fun!