PDA

View Full Version : chips/programmers


CoJo6.5T
04-07-2010, 01:34 PM
so is there any other chips for a 94 is there any with a monitor or more than 80 horse power i want to boost it up and dose the ssdiesel chip does the #9 resistor really make that big of a difference i just dont want to give them my core and ever want to turn it down agaiin for some reason

Garth J
04-07-2010, 07:43 PM
The 94 uses a removeable chip it is inside the ECM you can access it from a little door in the back it will have numbers or letters on it give these to Walt and he will get a chip burned for you.
Carefull installing it make sure you ground yourself and dont touch the contacts, and you get to keep your original chip.
You will have to have the 4 inch exhaust and air intake system to make it work properly and EGT & boost gauges should be installed along with the cooling upgrade then you will have a screaming diesel...G

nitrohogg
04-07-2010, 10:14 PM
#9 made a noticable diff in my truck

CoJo6.5T
04-08-2010, 07:58 PM
yea i have the intake but not exhaugst just yet i was just lookin for someting different that i can ajust and more than 80 hp

Garth J
04-08-2010, 09:16 PM
you dont need any more than that the motor wont stay together
I had the 80 HP in mine and it worked great

chessie6.5
04-13-2010, 06:35 PM
all that fuel has to go through that small pre chamber hole, limiting how much power the engine will make. Want more? Just switch to a direct injected engine. These 6.5's make decent power with reliability, but they are limited. Maybe someone will make a direct injection head for these some day. Of course, then the bottom end will present a problem without beefing or a girdle.

JD_countryboy
04-14-2010, 12:09 AM
How bout enlargin the hole in the pre cup? Think that could help?

CoJo6.5T
04-14-2010, 01:01 PM
dude i just noticed that you have a lot of stuff done to our truck have you takein the fuel plate out of you manual pump or can you do that to a 6.5 mechanical

JD_countryboy
04-15-2010, 12:04 AM
I have not yet turned up the fuel rate screw yet. Still toyin with other mods first. Hopin the tranny shifin trouble is overwith, and tryin to gain some mpgs. Water/meth, stacks, and more led's are next on the list.