cowboyupdan
05-19-2010, 10:59 PM
i wired in the pot according to the diagram the best that i could tell. i syill keep kicking into limp mode on the highway even at cruising speed. not sure if i wired it to the correct wires. one wire has 5 volts next wire has 2 volts and the last has 0 volts.. from what the diagram looks like is you tap into the open cuircut(0 volts) and then cut into one of the other ones. i have tried both but it still kicks into limp mode. does anyone know what color they tapped into and what color they cut into. thanks in advance.
the only other thing i can think of is that i havnt cleared the codes before the install. will test that tomorow
the only other thing i can think of is that i havnt cleared the codes before the install. will test that tomorow