PDA

View Full Version : Oil pressure switch


Brokedownmedic
08-02-2010, 09:49 PM
Has anyone heard of an alternate location for the oil pressure switch? I loosened the fuel filter as directed and looked all around and under it. All I could see was a dummy slot on the block that maybe could be drilled.

grancito
08-03-2010, 03:18 AM
The oil pressure sender is in the normal place and should not be connected to the "public safety" fuel control. Gasoline cars had electric fuel pumps since before I was born and did not cause fires. Bypass the OPS for the fuel pump, save an injector pump!!!!

Brokedownmedic
08-03-2010, 08:45 AM
The oil pressure sender is in the normal place and should not be connected to the "public safety" fuel control. Gasoline cars had electric fuel pumps since before I was born and did not cause fires. Bypass the OPS for the fuel pump, save an injector pump!!!!

Okay I''l look again. A friend and I looked for some time yesterday and couldn't find it. If not, I'll find a keyed hot wire and hook the lift pump up for a bypass. Hey, if its good enough for me, it should be good enough for my car!

trukdoc
08-03-2010, 11:01 AM
...sender on a 6.5/6.2diesel is the same place it is on every other g.m. v-8 block made...at the back of intake,towards the driverside BEHIND and slightly under the glow plug controler mounting...hope this helps...