Search:

I was thinking that with the masking tape. That was one of my options. Now the only thing I am worried about is breaking any of the manifold bolts. My truck has always been in Florida since new so...

I am about to install new cylinder heads on my 95 c1500 6.5l. Never did it on a diesel before. Everyone keeps telling me to make sure I don't get any dirt in my fuel lines and injectors. What would...

Is it safe to drain the fuel filter housing and add straight Diesel fuel treatment in the housing?

Well after using Blue Devil Gasket Sealer truck is no longer overheating. Before the overheating issue I noticed my oil pressure was low even after a fresh oil change. I added some Lucas Oil...

He sells the filter element by itself.

The funny thing about it is that I installed the starter 3 yrs ago.

Dropped the starter and the bolt that holds the battery cable to the starter solenoid was missing and that connection was burnt and the cable was just sitting there loose. The battery cable end at...

I'm going to drop the starter tomorrow and check it.

Today when I got off work my truck started to make this loud screeching sound as if my starter was engaged. I made it home (i only live like 3 min away from my job) and as soon as I park the sound...

I got it done. I wish I would of done it your way. I ended up removing my intake, coolant tank, and the AC accumalator and bracket off. The I broke the heater core tubes off the heater core. twisted...

Changing out my heater core today and notice that the clamps on my two heater hoses are upside down. How would I go about changing this? I does not look as if I can get to the from under the truck.

I will check that ASAP.

I went and used the Blue Devil head gasket sealer on my truck to give me some time to get the money up to grab some new heads and gaskets. So far my truck does not over heat. The temp gauge goes...

My HVAC controls are not working at all. I recently removed the fan and jumped it from my battery and it came on. I purchased a new head unit for my HVAC and still nothing. What should I look for...

Purchased a OEM from Autozone and no more leaks. Probably was a bad filter.

My temp gauge is still rising. When I filled the coolant up in my truck I opened the bleed screw and filled the recovery tank till coolant came out. Then I closed the bleed screw up. I filled the...

Put oil on the seal and re-tightened fuel filter and it still leaks from egde of fuel filter. If I put a rag at the edge of FFM where filter mates to surface the whole rag gets wet. I think I will...

I took the filter out and I will let it drain. In the morning I will oil the seal and put it back on.

Now that the famous rapper Tupac Shakur's mom has passed. They are going through the estate and found a 6.5L Hummvee that he bought only a month before he died. It only has 10,ooo miles on it and it...

Okay. Will try.

I have the new designed fuel filter for my 6.5L. For some reason it is not sealing. I have it on very tight and fuel is still seeping from the filter. Has any one had a problem like this from the new...

Replaced the whole hose. The T-Valve was a B!tch to put back in the new hose.

Got everything on. filled it with more coolant. No leaks. Crank up truck. Fuel sprouts from t valve. Looks like hose right under t valve has a crack in it. SMH.

I received the coolant crossover yesterday. While taking of the old crossover noticed the coolant was not even coming from the crack in the crossover. It was just pouring past the gaskets and running...

SSDiesel 4 Inch Exhaust. Make sure you get new motor mounts just incase your originals are sagging.