SSDieselSupply.com
SSDPro-Exhaust.com
Page 1 of 3 123 LastLast
Results 1 to 10 of 30

Thread: Boost Fooler

  1. #1
    Join Date
    Sep 2012
    Posts
    12

    Default Boost Fooler

    i cant find a way to make a boost fooler anywhere on this site can someone please help.

  2. #2
    Join Date
    Feb 2007
    Location
    Baja California Sur Mexico
    Posts
    2,807

    Default

    It is on the site somewhere, all you need is a 10K ohm potentiometer. I'll look for the circiut diagram later.
    Grant H.
    1995 6.5 turbo GMC K2500 extra cab 4x4 pickup, PMD under bumper, mechanical wastegate, 228,000 miles, rebuilt engine, 4.10 diff, 16 mpg
    1994 6.5 turbo GMC K2500 4x4 suburban "F" VIN #9 resistor, PMD in the bumper, mechanical waste gate, 226,000 miles, Positrac 3.73 diff, 17 mpg highway.
    1982 4x4 shortbed 6.2 Chev 260,000 miles untouched motor 17 MPG 4.27 diff. Best thing I ever owned, 21 years.

  3. #3
    Join Date
    Sep 2012
    Posts
    12

    Default

    thank you i really wanna get this done but i cant seem to find any info on how to install it and whatelse is required of me.

  4. #4
    Join Date
    Feb 2007
    Location
    Baja California Sur Mexico
    Posts
    2,807

    Default

    Try this, if no luck I will draw the diagram and post it. http://www.dieseltowingresource.com/...08&postcount=4
    Grant H.
    1995 6.5 turbo GMC K2500 extra cab 4x4 pickup, PMD under bumper, mechanical wastegate, 228,000 miles, rebuilt engine, 4.10 diff, 16 mpg
    1994 6.5 turbo GMC K2500 4x4 suburban "F" VIN #9 resistor, PMD in the bumper, mechanical waste gate, 226,000 miles, Positrac 3.73 diff, 17 mpg highway.
    1982 4x4 shortbed 6.2 Chev 260,000 miles untouched motor 17 MPG 4.27 diff. Best thing I ever owned, 21 years.

  5. #5
    Join Date
    Sep 2012
    Posts
    12

    Default

    Unfortunately no dice on that resource page you posted. It's invalid.

  6. #6
    Join Date
    Feb 2007
    Location
    Baja California Sur Mexico
    Posts
    2,807

    Default

    Here is the diagram, sorry about the shakey lines, I drew it in Paint.
    Attached Images Attached Images
    Grant H.
    1995 6.5 turbo GMC K2500 extra cab 4x4 pickup, PMD under bumper, mechanical wastegate, 228,000 miles, rebuilt engine, 4.10 diff, 16 mpg
    1994 6.5 turbo GMC K2500 4x4 suburban "F" VIN #9 resistor, PMD in the bumper, mechanical waste gate, 226,000 miles, Positrac 3.73 diff, 17 mpg highway.
    1982 4x4 shortbed 6.2 Chev 260,000 miles untouched motor 17 MPG 4.27 diff. Best thing I ever owned, 21 years.

  7. #7
    Join Date
    Sep 2012
    Posts
    12

    Default

    thank you for the diagram. i just need a 10k pot to get this set up? what about anything else? thank you again for all the help

  8. #8
    Join Date
    Feb 2007
    Location
    Baja California Sur Mexico
    Posts
    2,807

    Default

    All you need is the potentiometer, best to install it inside the cab for easy adjusting. How to know the right position? I haven't installed mine, have a mechanical waste gate and the sensor hole blocked. Hope it is clear enough to see that wire A has the insulation removed to connect a wire to the pot, and wire B is cut and wires from each side of the cut run to the pot.
    Grant H.
    1995 6.5 turbo GMC K2500 extra cab 4x4 pickup, PMD under bumper, mechanical wastegate, 228,000 miles, rebuilt engine, 4.10 diff, 16 mpg
    1994 6.5 turbo GMC K2500 4x4 suburban "F" VIN #9 resistor, PMD in the bumper, mechanical waste gate, 226,000 miles, Positrac 3.73 diff, 17 mpg highway.
    1982 4x4 shortbed 6.2 Chev 260,000 miles untouched motor 17 MPG 4.27 diff. Best thing I ever owned, 21 years.

  9. #9
    Join Date
    Sep 2012
    Posts
    12

    Default

    those are also next on my to do. i wanna get pot done this weekend and then those next unfortunately this is my first diesel so i wanna make a project of it but there is a learning curve

  10. #10
    Join Date
    Sep 2012
    Posts
    12

    Default

    Do I need a boost gauge perform I installs he 10k pot.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •